Victron energy VBC 12-24-48V Manual page 11

3.2 Main menu
To view more detailed information, press the "Enter" button to enter the
VBC menu.
Name
Battery voltage Displays the voltage of the battery.
Battery current Displays the DC current that flows into or out of the battery.
Consumed Ah Displays the energy consumed since the battery was last fully charged.
State of charge The state of charge indicates the percentage of the battery capacity that
is still available for consumption. A full battery will show 100 %, and an
empty battery will display 0 %. This is the best way to see when the
batteries need to be recharged.
Time to go Displays the estimated time, based on the current load, before the
batteries need to be recharged.
Bat. Displays the battery temperature.
temperature
Software The software version of this device.
version
3.3 Historic data
The VBC will keep track of historical data to enable you to get more
information about the state and the past use of the batteries.
3.3.1 Where to find the "Historical data" menu
Battery Monitor
13.1V -0.5A
Battery voltage
13.10 V
Description
Step 1) Press "Enter" to enter the VBC menu.
99%
Step 2) Press "▼" to scroll through the menu
until you see 'Historic Data".
Units
Volts.
Amps.
Amp
hours.
Percent
.
Hours
and
minutes
.
Degree
s
Celsius.
7