Victron energy VBC 12-24-48V Manual page 10

3 USING YOUR BATTERY MONITOR
All control of the VBC is provided through the VPN. To switch on the VPN,
hold down one of the buttons until the VPN beeps. When the VPN has
finished starting up, the device list will be displayed. If there are other
VE.Net devices connected, it may be necessary to press "▼" until the
Battery Controller is displayed. For more information on using the VPN,
refer to the VPN manual.
3.1 Quick status line
In the root menu of the VPN you will see this screen, which consists of
the name of the VBC and the "quick status" line.
Battery voltage
Notes:
1. You can always return to this position by pressing "Cancel"
repeatedly.
2. The state of charge is only displayed when the VBC is
synchronised (see chapter 4.1.3 for more information).
6
Battery Monitor
13.1V -0.5A
Battery current
99%
State of charge