Table of Contents
Advertisement
1.12 Freezing during shipping
1.12 Freezing during shipping
Components in the PILS may be damaged when exposed to freezing temperatures during
shipping. Be sure to dry out the device prior to shipment.
1.13 Accessories
Only accessories approved by BRECHTEL and meeting required factory specifications
may be used with the device.
1.14 Lifting and carrying
The PILS and Auto-collector shipping boxes are large and moderately heavy. Take care
to lift and carry the boxed devices, as well as the devices themselves, to avoid injury.
1.15 No User serviceable parts
WARNING: There are no user serviceable parts within the device. Removal
of the PILS control chassis top cover may expose the user to high voltages, high tem-
peratures, and pressurized steam. Only trained service personnel should remove the
chassis cover. Removal of the top cover by anyone other than a trained service per-
sonnel will void the product warranty.
1.16 EMI statement (Class A)
US:
NOTE: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio fre-
quency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
CANADA:
83-00009-01A
PILS 4001-115V and 4001-230V
Page 8 of 74
Advertisement
Table of Contents
