Electrical Shock Hazard; Water Leak Hazard; Replaceable Fuses; Power Cord - BRECHTEL 4001-115V Instrument Manual

1.7 Electrical shock hazard

ticular, if the insulation on the steam delivery tube between the steam heater and the
steam injector is removed, the exposed metal surfaces will be hot during operation.
1.7 Electrical shock hazard
Removing the chassis cover may expose you to high AC voltage circuits that can
harm you if touched. Only trained service personnel should remove the chassis cover.

1.8 Water leak hazard

Improperly connecting the liquid supply or drain bottle tubes to the peristaltic pump
may result in a water leak. Improperly connecting the liquid supply tube from the peri-
staltic pump to the Auto-collector may result in a water leak. Blockage of the steam
tip or steam heater coil tubes may result in back pressure producing a water leak in the
steam heater liquid supply line. Take care to locate devices so a water leak near the front
of the PILS chassis or the rear panel of the Auto-collector does not create a hazardous
condition.

1.9 Replaceable fuses

Only replace AC power fuses with "H" style fuses having identical size, voltage, and cur-
rent carrying capacity. The internal 24 VDC fuse may only be replaced by trained service
personnel.

1.10 Power cord

Caution: Only use the power cord provided with the Model 4001 PILS. Risk of fire if used
with a power cord which has an inadequate rating. Contact Brechtel for a replacement
cord if the power cord is damaged or missing.

1.11 Shock during shipping

If the shock watch installed on the shipping case has tripped, contact BRECHTEL. Vi-
sually inspect the PILS to check for any components that may have come loose during
shipping.
83-00009-01A PILS 4001-115V and 4001-230V Page 7 of 74