Table of Contents
Advertisement
3
Declaration of Conformity
3 Declaration of Conformity
Name: Particle Into Liquid Sampler
Regulatory Model Number: 4001-115V, 4001-230V
Environmental Conditions: Pollution Degree 2, Installation Category II, Equipment Class
1. This equipment requires the following space for ventilation, maintenance access, and
easy access to the Main Power Switch. There must be clear space of at least 30 cm (12")
on all sides of the equipment. The bench in your laboratory must be able to support the
entire system and other laboratory equipment.
Conforms to the following safety standards:
Canadian Standards Association (CSA) C22.2 No. 61010-1
Nationally Recognized Test Laboratory (NRTL): ANSI/UL 61010-1
International Electrotechnical Commission (IEC): 61010-1, 61010-2-010, 61010-2-081
EuroNorm (EN): 61010-1
Conforms to the following regulations on Electromagnetic Compatibility (EMC) and Ra-
dio Frequency Interference (RFI):
CISPR 11/EN 55011: This is a Class A product. In a domestic environment this product
may cause radio interference in which case the user may be required to take adequate
measures.
IEC/EN 61326-1
AS/NZS CISPR11
US:
NOTE: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio fre-
quency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment
83-00009-01A
PILS 4001-115V and 4001-230V
Page 11 of 74
Advertisement
Table of Contents
