Beok Controls BOT-R315 Manual page 2

•
Ex factory Setting
-
Week day Mon. Tue.
Time Zone
00:00~06:00 19℃ 19℃
06:00~11:30 22℃ 22℃
11:30~16:30 20℃ 20℃
23℃ 23℃
16:30~00:00
• 16.
Temperature up, or other parameters setting
In case of internal and external sensors are selected,press
button for 3 sec, Setpoint is displaying external
sensor's temperature; after 3 sec, it returns to setpoint.
Menu
• 17 .
• 18.
Temperature down, or other parameters setting
On/off button
• 19.
Parameters Setting
Press button to switch off the and then press and hold
button for 3 second.
• D1 Diff. Temp of Switch On/ Switch off :
• from 0.2 ℃ ~ 2.0℃ , select by buttons
• D2 Temperature Calibrition :
• - 4 ℃ to + 4 ℃ , select by buttons
• D3 Frost Protection :
5 ℃ to 15 ℃ , select by buttons
•
• D4 ~D7 RF Code
• •
Child Lock/Unlock:
Push and hold and
for 5 sec to LOCK all buttons
Push and hold and
5sec to UNLOCK all buttons
Wiring Diagram
•
Wed. Thur. Fri. Sat.
19℃ 19℃ 19℃ 19℃
22℃ 22℃ 22℃ 22℃
20℃ 20℃ 20℃ 20℃
23℃ 23℃ 23℃ 23℃
buttons simultaneously
buttons simultaneously for
Settings
RF IP Learning
Sun.
factory
.
If newlearningis required
19℃
1. Press
and
2(referto belowphoto) is flashingin greenrapidly
22℃
2. Switch off the thermostat, and press and hold the
thermostat'sON
20℃
setting appears
3. Switchto the d6 settingsvia ON/OFFbutton
23℃
on thermostat to confirm the connection
thermostat, and the green LED 2 (refer to below photo) on
receiverwill turn off completely
.
.
.
5
Dimension
Unit:mm
Replacement of Batteries
If the battery symbol
exhausted and must be replaced
Warranty
We offer warranty of 12 month, from the sales date. If it is not
the quality problems, or beyond the warranty period, we will
charge for the after
7
Transmitter and Receiver is well paired ex
:
Pleasefollowthe steps
.
holdthe RF Connectionbuttonon receiveruntil LED
OFF button for 3 seconds until the menu
/
.
.
RF Connection
LED 2 (Green
)
appears, the batteries are almost
sales services
-
-
below
as :
.
and then press
,
Switch on the
.
LED 1 (Red
)
6
8