Beok Controls BOT Series Quick Start Manual

BOT SERIES BOILER THERMOSTAT
I. Product Summary:
BOT series boiler thermostats are with LCD digital display big screen,
and it is developed according to market's requirements. Thermostats can
be installed on the wall, or directly put on the table. This series thermostats
are easy to operate, and with complete functions. It can be used to
control boilers, motorized ball valves, motorized valves, electric valves,
solenoid valves, etc.
II. Technical Parameter:
Working Voltage
Current Load
Temperature Control Accuracy
Setting Temperature Range
Limiting Temperature Range
Consumption
Temperature Sensor
III. Main Button Instruction
: ON/OFF Switch;
:Mode Button. Switch between
Control Mode, Temporary Manual Mode. Long press to enter
period setting.
:Time Set. Hour, minute and week setting;
:Up Button. To increase temperature. When press it with
it can set programmable function;
:Down Button. To reduce temperature. When press it with
it can set programmable function;
: Key Lock. Long press
:
IV. User Interface Explanation
:Manual Control. :Temporary Manual Control.
:Heating.
:First Period. Wake up in the morning.
:Second Period. Out of home in the morning.
:Third Period. Go home in the afternoon.
:Forth Period. Out of home in the afternoon.
:Fifth Period. Go home in the evenning.
:Sixth Period. Sleep in the evening.
: Anti-frozed function open.
Open/Close
1.5Vx2(Two sections of 1.5V 5 batter y)
Output power can be made 220V/110V
3A
±1ºC
5-60℃
5-99ºC
<0.3W
NTC
Manual Mode, Auto Period
5 seconds to lock or unlock;
:Auto Control.
State Power
Power Indicator Light
State Indicator Light
Switch Indicator Light
V. Model Spec
Model
BOT-W306
BOT-X306
BOT306RF-WIFI
VI. Operation Instruction
Time Setting
Press , the time area will display Minute, Hour and Week, then press
or to modify time.
Programmable Period Temperature Setting
6 periods every day
in a week
5+2 Controls 1 2 3 4 5
6+1 Controls 1 2 3 4 5 6
7+0 Controls 1 2 3 4 5 6 7
First step, long press
displays 12345 (From Monday to Friday); Press
123456(From Monday to Saturday); Press
1234567(From Monday to Sunday);
Second step, time and temperature setting in every period. When screen
display 12345 or 123456 or 1234567, press
Press to enter time setting. To modify and save through
Att: When auto-control
be changed to temporary manual control. Temporary manual control means
when thermostat is in auto-control mode(program mode), user press
or to modify temperature setting, thermostat now is in temporary manul
and
control state. When next periods comes, thermostat will automatically
return to acquiescent period program control mode.
and
Programmable Period Time Setting
First press
time in the period.
Default Program Data
Workday
Weekends
Att:
1. The default temperature values of 3 and 4 period
in workday is same with 2 period. If user need,
please change this default temperature.
2. Setting temperature is 00, it means this period
is power off.
VII. Advanced Setting
In the state of power-off, long press and hold
setting mode. Then press
Wireless Function Terminal Receiver
, screen display LooP(Cycling Control), screen
,if user needs to reset the temperature, it can
, then press to change to time options, user can modify
Period Icon Default Time Default Temperature
1
06:00 20℃
15℃
08:00
2
11:30 15℃
3
12:30 15℃
4
5 17:30 22℃
22:00
6 15℃
08:00 22℃
1
2
23:00 15℃
Firstly, press time button
Then, press power button
After entering advanced setting, press
choose next parameter changing.
to set relative item.
Wi-Fi Function
Set, or modify parameter
A Week Loop Control
3. Press one time, time twinkles,
you can set the time during this period.
time during this period.
1. After Power is on, long press 5 seconds
to enter period program. Loops means a
Week loop.
2. Press again, room temperature display
and twinkle, you can set the temperature
during this period.
4. Press again, to set the next period
temperature and time with the same method.
one time, it displays
two times, it displays
to enter temperature setting.
or .
to
then press into advanced