Mounting Location - NEC MultiSync M751 User Manual

Installing a safety wire
WARNINGN Please refer to


CAUTIONN:
Please refer to


NOTEN When installing, do not apply pressure to the LCD panel or excessive force to any part of the monitor by pushing or


leaning on it. This may cause the monitor to become distorted or damaged.
Handles for safety wire
Attach the safety wire to the handles shown in the figure below.

Mounting Location

WARNINGN
Please refer to


NOTEN Allow for adequate ventilation or provide air conditioning around the monitor, so that heat can properly dissipate away


from the monitor and from the mounting equipment.
"WARNING 9".
"CAUTION 7".
Safety wire
(Portrait)
"WARNING 8".
Safety wire (Landscape)
English−16