Control Panel - NEC MultiSync M751 User Manual

Large format display
Table of Contents

Advertisement

Control Panel

Left
⏻ Button (power button)
1
Switches between power on and standby. See
MENU/EXIT Button
2
Opens the OSD menu when the OSD menu is closed.
Acts as a back button within the OSD menu to move to the
previous OSD menu.
Acts as an exit button to close the OSD menu when on the
main menu.
3
Joystick Key/SET Button
v/wN Left/Right control.
Navigates to the left or right through the OSD Control
menus.
Increases or decreases adjustments for individual
OSD settings.
Directly adjusts the VOLUME when the OSD menu is
closed.
s/rN Up/Down control.
Navigates up or down through the OSD Control menus.
SET: (button press)
Selects, or sets the setting for, the highlighted function in
the OSD menu.
*
: The v, w, r and s functions change according to the monitor orientation
1
(landscape/portrait).
SET
Up
Right
Down
page
36.
*1
4
3
2
1
INPUT Button
4
INPUT: Cycles through the available inputs when the OSD
menu is closed.
[DisplayPort1], [DisplayPort2], [HDMI1], [HDMI2],
[OPTION]*
are shown as their factory preset name.
*
: This function depends on which Option Board is installed in the monitor.
1
*
: This input is available when the optional Raspberry Pi Compute Module
2
Interface Board and Raspberry Pi Compute Module are installed.
See
page
84.
5
Power Indicator
Glows blue when the monitor is in active mode*
Green and Amber blink alternately when the
[SCHEDULE INFORMATION] function is enabled.
When a component failure is detected within the monitor,
the indicator will blink red or blink a combination of red
and blue.
Please refer to the Power ON and OFF Modes table on
page
36.
*
: If [OFF] is selected in the [POWER INDICATOR] the LED will not glow
1
when the monitor is in active mode. See
6
Remote Control Sensor
Receives the signal from the remote control (when using the
wireless remote control). See
7
Ambient light sensor
Detects the level of ambient light, allowing the monitor
to make automatic adjustments to the backlight setting,
resulting in a more comfortable viewing experience. Do not
cover this sensor. See
English−22
5
6
, [COMPUTE MODULE]*
1
page
107.
page
37.
page
49.
7
. Input names
2
.
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Multisync m861

Table of Contents