Download  Print this page

NEC MultiSync M500 User Manual

Multisync m series
Hide thumbs

Advertisement

MultiSync
MultiSync
M Series
M Series
78133441
NEC Multimedia Series
User's Manual
User's Manual
1
®
®
1
2-3
4-7
10-11
12
13
14
15
6/24/98, 7:49 AM

Advertisement

Table of Contents
loading

  Also See for NEC MultiSync M500

  Related Manuals for NEC MultiSync M500

  Summary of Contents for NEC MultiSync M500

  • Page 1: Table Of Contents

    NEC Multimedia Series MultiSync MultiSync M Series M Series User’s Manual User’s Manual Contents Quick Start Controls Recommended Use 8-9 Specifications Features Troubleshooting References Limited Warranty 78133441 10-11 ® ® 6/24/98, 7:49 AM...
  • Page 2 TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
  • Page 3: Contents

    Contents Your new NEC Technologies MultiSync should contain the following: • MultiSync M Series Monitor with removable tilt/swivel base MultiSync M , JC-1572VMA-2 ™ MultiSync M , JC-1735VMA-2 ™ • Power Cord • Captive Combined Signal Cable • User’s Manual •...
  • Page 4: Quick Start

    (Figure A.1). Tighten all screws. For the Mac: Connect the MultiSync M Series Macintosh cable adapter (not included) to the monitor connector on the Macintosh (Figure B.1). Attach the 15-pin mini D-SUB end of the captive combined signal cable to the Macintosh cable adapter on the computer (Figure B.1).
  • Page 5 This is the location of the built-in microphone. This is not to be used for the input for the mini jack cable. (Figure D.1) 6. Connect one end of the power cable to the MultiSync M Series monitor and the other end to the power outlet. (Figure C.1) 7.
  • Page 6: Controls

    Controls ™ buttons on the front of the monitor function as follows: Main Menu Exits the OSM controls. EXIT Moves the highlighted CONTROL area up/down to select one of the controls. Moves highlighted CONTROL area left/right to select +/– one of the controls.
  • Page 7: Geometry Controls

    Controls Size and Position Left/Right: Moves the image horizontally (left or right). Up/Down: Moves the image vertically (up or down). Narrow/Wide: Increases or decreases the horizontal size of the image. Tall/Short: Increases or decreases the vertical size of the image. Color Control/AccuColor Color presets 1 through 5 select the desired color setting.
  • Page 8 OSM Turn Off: The OSM menu will stay on as long as it is in use. In the OSM Turn Off sub-menu, you can select how long the monitor waits after the last touch of a button to shut off the OSM menu. The preset choices are 10, 20, 30, 60, 120 seconds.
  • Page 9 When the tips appear, follow the advice of the tips and press EXIT to clear. For additional information on setting up a healthy work environment, see page 9. Display Mode: Indicates the current mode and frequency setting of the monitor. 78133441 6/24/98, 7:50 AM...
  • Page 10: Recommended Use

    • If possible, position the monitor so that it is facing the east to minimize the effects of the earth’s magnetic field. • Changing the direction of the monitor while it is powered on may cause image discoloration.
  • Page 11: Recommended Use

    • Get regular eye checkups. For more detailed information on setting up a healthy work environment, call NEC at (800) 820-1230, NEC FastFacts document #900108 or write the American National Standard for Human Factors Engineering of Visual Display Terminal Workstations –...
  • Page 12: Specifications

    Specifications Monitor Specifications Diagonal: Picture Tube Viewable Image Size: Radius: Video: Input Signal Sync: Analog input: Display Colors Horizontal: Synchronization Vertical: Range Maximum Resolution Resolutions Supported Resolution based on horizontal and vertical frequencies only Horizontal: Active Display Area Vertical: (Factory Setting)
  • Page 13 Monitor Specifications Diagonal: Picture Tube Viewable Image Size: Radius: Video: Input Signal Sync: Analog input: Display Colors Horizontal: Synchronization Vertical: Range Maximum Resolution Resolutions Supported Resolution based on horizontal and vertical frequencies only Horizontal: Active Display Area Vertical: (Factory Setting)
  • Page 14: Features

    ™ (Intelligent Power Manager) System: Provides innovative power-saving methods that allow the monitor to shift to a lower power consumption level when on but not in use, saving two-thirds of your monitor energy costs, reducing emissions and lowering the air conditioning costs of the workplace.
  • Page 15: Troubleshooting

    Macintosh compatible and that the card is properly seated in the computer. LED on monitor is not lit (no green, orange, yellow color can be seen) • Power Button should be in the ON position and power cord should be connected.
  • Page 16: References

    References • BBS NEC Technologies’ Remote Bulletin Board System is an electronic service accessible with your system and a modem. Communication parameters are: 300/1200/2400/9600/14.4k/28.8k bps, no parity, 8-data bits, 1 stop bit • Customer Service/ Technical Support • Direct Sales •...
  • Page 17: Limited Warranty

    Limited Warranty NEC Technologies, Inc. (hereinafter “NECTECH”), warrants this Product to be free from defects in material and workmanship and, subject to the conditions set forth below, agrees to repair or replace any part of the enclosed unit which proves defective for a period of three (3) years from the date of first consumer purchase.
  • Page 18 Notes 78133441 6/24/98, 7:50 AM...
  • Page 19 Notes 78133441 6/24/98, 7:50 AM...
  • Page 20: Declaration Of Conformity

    FCC Rules. MultiSync is a registered trademark of NEC Technologies, Inc. in the U.S. and of NEC Home Electronics, Ltd. in Canada, UK, Germany, France, Spain, Italy, Austria, Benelux, Switzerland, Denmark, Finland, Norway and Saudi Arabia. CromaClear, AccuColor, OptiClear and ErgoDesign are registered trademarks of NEC Technologies, Inc.