Electronic Control System
WINE STORAGE CONTROL BOARD
LAYOUT AND SUMMARY TABLE
The electrical connection points on the wine storage control board
are labeled Alphanumerically. These labels correspond with the
alphanumeric control board summary layout table on the wiring dia-
gram. By referencing the table, it is possible to identify which com-
ponents are connected at which connection points on the control
board. Below is a layout diagram of the control board, followed by a
copy of a summary table.
NOTE:
All components on the control board are non-replaceable. If
problems with the control board are identified, the complete control
board must be replaced.
J8
WINE
CONTROL
BOARD
Figure 3-2. Control Board Layout
7011544 - Revision A - November, 2008
International W
International W
(See Figures 3-2 and 3-3)
J1
1
J2
8
1
2
J3
14
E2
E1
E3
ine Storage
ine Storage
(ICB400)
(ICB400)
Figure 3-3. Control Board Summary Table
3-4
Series
Series