Configuring Your Computer On The Homeport; Configuring Tcp/Ip Settings; Windows 95 Or 98 Computer; Windows 2000 - SonicWALL TELE3 TZ Getting Started Manual

Configuring Your Computer on the HomePort

To access the Internet through the TELE3 TZ or TELE3 TZX on your home computer, you must
change the network configuration of your home computer, and configure it to be on the same
subnet (network) as the HomePort. Use the instructions below to configure the TCP/IP settings
on your home computer.

Configuring TCP/IP Settings

The SonicWALL HomePort is pre-configured with the IP address "172.16.0.1". For initial
configuration, set the IP address of the Management Station to "172.16.0.10".

Windows 95 or 98 computer

1. From the Start list, highlight Settings and then select Control Panel.
2. Double-click the Network icon in the Control Panel window.
3. Double-click TCP/IP in the TCP/IP Properties window.
4. Select the Specify an IP Address radio button.
5. Enter "172.16.0.10" in the IP Address field.
6. Enter "255.255.255.0" in the Subnet Mask field.
7. Enter the Default Gateway Address of "172.16.0.1" in the Default Gateway field.
8. Enter the DNS settings from the Status page of the TELE3 TZ or TELE3 TZX.
9. Click OK, and then click OK again.
10. Restart the computer for changes to take effect.

Windows 2000

1. From the Start list, highlight Settings and then select Network and Dial Up
Connections.
2. Select the Local Area Network icon in the Network and Dial Up Connections
window.
3. Highlight TCP/IP in the Local Area Connection Properties window.
4. Select the Specify an IP Address radio button.
5. Enter "172.16.0.10" in the IP Address field.
6. Enter "255.255.255.0" in the Subnet Mask field.
7. Enter "172.16.0.1" in the Default Gateway field.
8. Enter the DNS Settings from the Status page of the TELE3 TZ or TELE3 TZX.
9. Click OK, and then click OK again.

Macintosh computer

1. From the Apple list, choose Control Panel, and then choose TCP/IP to open the TCP/
IP Control Panel.
2. From the Configure list, choose Manually.
3. Enter "172.16.0.10" in the IP address field.
4. Enter "255.255.255.0 in the Subnet Mask field.
SonicWALL Telecommuter's Guide to Getting Connected Page 21