Connecting To A Sonicwall Security Appliance; Using A Computer Connected To Your Lan, Launch Your Web Browser And Enter The Ip Address Of Your Existing Sonicwall Security Appliance In The Location Or Address Field; When The Management Interface Displays, Enter Your User Name And Password In The Appropriate Fields And Click Login; Note: Remember That You Are Logging Into Your Sonicwall - SonicWALL SRA 1200 Getting Started Manual

13. In the 'Add Rule' window, create a rule to allow access to
the LAN for the address group you just created:
Action
From Zone
To Zone
Service
Source
Destination
Users Allowed
Schedule
Enable Logging
Allow Fragmented Packets
14. Click OK to create the rule.
Continue to "Testing Your Remote Connection" on page 39
Page 32 Scenario B: SRA on an Existing DMZ
Allow
SRA
LAN
Any
The address group you just created,
such as SonicWALL_SRA_Group
Any
All
Always on
Selected
Selected
Scenario B: SRA on an Existing DMZ
This section provides procedures to configure your gateway
appliance based on Scenario B. This section contains the
following subsections:
Prerequisites
•

Connecting to a SonicWALL Security Appliance

• Allowing WAN -> DMZ Connection
• Allowing DMZ -> LAN Connection
Connecting to a SonicWALL Security Appliance
1. Using a computer connected to your LAN, launch your
Web browser, and enter the IP address of your existing
SonicWALL security appliance in the Location or Address
field.
2. When the management interface displays, enter your
User Name and Password in the appropriate fields and
click Login.
Note:
Remember that you are logging into your SonicWALL
firewall, not the SonicWALL SRA.
- page 32
- page 33
- page 34