Base Instrument Cluster Descriptions - Chrysler Voyager 2023 Owner's Manual

Table of Contents

Advertisement

60
GETTING TO KNOW YOUR INSTRUMENT PANEL
B
I
C
ASE
NSTRUMENT
LUSTER
D
ESCRIPTIONS
Use this QR code to access your digital
experience.
1.
Tachometer
 Indicates the engine speed
in revolutions per minute
(RPM x 1000).
2.
Instrument Cluster Display
 When the appropriate conditions exist, this display
shows the instrument cluster display messages
page 62.
Ú
3.
Speedometer
 Indicates vehicle speed.
4.
Temperature Gauge
 The temperature gauge shows engine coolant
temperature. Any reading within the normal range
indicates that the engine cooling system is oper-
ating satisfactorily.
 The gauge can indicate a higher temperature
when driving in hot weather or up mountain
grades. It should not be allowed to exceed the
upper limits of the normal operating range.
WARNING!
A hot engine cooling system is dangerous. You or others
could be badly burned by steam or boiling coolant. You
may want to call an authorized dealer for service if your
vehicle overheats
page 204.
Ú
CAUTION!
Driving with a hot engine cooling system could damage
your vehicle. If the temperature gauge reaches "H" pull
over and stop the vehicle. Idle the vehicle with the air
conditioner turned off until the gauge drops back into
the normal range and is no longer red. If the gauge
remains on the "H", turn the engine off immediately
and call an authorized dealer for service.
5.
Fuel Gauge
 The gauge shows the level of fuel in the fuel tank when
the ignition switch is in the ON/RUN position.
 The fuel pump symbol points to the side
of the vehicle where the fuel door is
located.
NOTE:
The warning/indicator lights will illuminate for a bulb
check when the ignition is first cycled.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents