Chrysler Voyager 2023 Owner's Manual page 67

Oil Pressure
Displays the actual oil pressure.
Oil Life
Displays the remaining engine oil life as a percentage.
To reset the Oil Life, you must hold the OK button.
The "Hold OK to Reset" instruction will be displayed at all
times, but the following conditions will need to be met in
order to reset Oil Life:
 The ignition must be in the ON/RUN position
If the conditions are met, holding the OK button will reset
the gauge and the numeric display will return to 100%.
If the conditions are not met, a pop-up message will
display for five seconds, describing the required
conditions, and then the Oil Life screen will reappear.
Battery Voltage
Displays the actual battery voltage.
Engine Hours — If Equipped
Displays the number of hours of engine operation.
Driver Assist — If Equipped
Push and release the up or down
until the Driver Assist display icon is highlighted in the
instrument cluster display page 86.
Ú
Fuel Economy
Push and release the up
until the Fuel Economy Menu item is highlighted in the
instrument cluster display. The Fuel Economy Menu will
display the following:
 Two submenu pages that can be toggled between
using the left
with Current Value displayed and one without the
Current Value displayed:
 Average Fuel Economy (MPG, L/100 km, or km/L)
 Range To Empty (miles or km)
 Current Fuel Economy (MPG, L/100 km, or km/L)
 The Max and Min values will correspond to the
particular engine requirements
 Hold OK to reset average fuel eco nomy information.
Trip Info
Push and release the up
until the Trip Menu item is highlighted in the instrument
cluster display. Push the left
to scroll through the Trip A and Trip B submenus. The Trip
information will display the following:
arrow button
 Distance
 Average Fuel Economy
 Elapsed Time
Hold the OK button to reset feature information.
GETTING TO KNOW YOUR INSTRUMENT PANEL
or down arrow button
and right arrow buttons; one
or down arrow button
or right arrow button
Stop / Start – If Equipped
Push and release the up or down
until the Stop/Start menu title is displayed in the
instrument cluster display.
Audio
Push and release the up or down
until the Audio Menu displays in the instrument cluster
display.
Messages
Push and release the up or down
until Messages is highlighted in the instrument cluster
display. This feature shows the number of stored warning
messages. Pushing the right arrow button will allow
you to see what the stored messages are.
NOTE:
The pop-up messages indicate the status of the system
and/or the conditions that need to be met. Messages
remain in the stored stack until condition is cleared.
Screen Setup
Push and release the up or down
until the Screen Setup Menu displays in the instrument
cluster display. Push and release the OK button to enter
the submenus. The Screen Setup feature allows you to
change what information is displayed in the instrument
cluster as well as the location that information is
displayed.
NOTE:
Based on your vehicles trim level, some of the following
options may not be available.
65
arrow button
arrow button
3
arrow button
arrow button