Chrysler Voyager 2023 Owner's Manual page 29

Easy Entry — With The Seat Folded Flat
The seats can be folded and tilted for more accessibility
for passengers to enter and exit the third row.
1. Without a child seat installed, you can fold the seat
by pulling the recliner handle on the bottom part of
the seat. Before pulling the recliner lever, make sure
the arm rests are folded up.
Recliner Lever
2. To put it back into position, pull back on the folded
seat and make sure that it locks into position. Then,
pull the seatback toward the back and fold down the
arm rests.
Exit For Third Row Passengers — Stow 'n Go Seats Only
If the second row is equipped with Stow 'n Go, third row
passengers can pull the strap and push the seat forward
to fold the seatback down and tilt the seat to the floor for
an easy exit.
Pull Strap For Third Row Passengers
NOTE:
This process is for when there is no child seat installed.
Use the easy entry lever if a child seat is installed.
Second Row Removable Quad Seat
The second row quad seats, not equipped with the Stow 'n
Go feature, are removable for added cargo space.
Removing Seat
1. Adjust seat to the full rearward position.
2. Lift the recline lever to fold the seatback flat against
the seat cushion.
GETTING TO KNOW YOUR VEHICLE
Fold-Flat Seat Recline Lever
NOTE:
Push downward on the seatback to make sure it is in the
locked position.
3. The release strap is located on the front of the seat,
near the floor.
Seat Release Strap
27
2