Provisioning Set-Up - Cisco Codec C Series Getting Started Manual

Cisco TelePresence Video Systems
Contents

Provisioning set-up

(when using a provisioning system)
Start the Provisioning Wizard
tap the Settings symbol in the upper right corner. tap

Administrator > Provisioning and then Start.
NoTe: When you connect a MX or eX system for the first time,
the Provisioning Wizard starts automatically.
enter required parameters
enter the parameters required for the chosen provisioning infrastructure (see illustrations below). then tap
Webex TelePresence
upon ordering the Cisco Webex telepresence service, you
have received a Video number and an
Please contact your company's Webex telepresence administrator
if you do not have a video phone number and an activation code.
Configure Your TelePresence Unit
Back
WebEx Telepresence is a subscription based video
service from Cisco. Enter the video number and activa-
tion code you received when you subscribed to the
service. If you don't have this information, contact
your company's WebEx Telepresence administrator.
Infrastructure WebEx Telepresence
Video number
Activation code
Cancel
Back to task overview
D14639.09 Video Systems Getting Started Guide TC6.1, April 2013.
Introduction User interfaces
Choose provisioning infrastructure
Choose one of the following supported provisioning systems:
• Webex telepresence
• Cisco uCM (unified Communications Manager)
• Cisco VCS (Video Communication Server)
tap Next to proceed.
Cisco UCM
Contact your uCM provider to get the iP address or dNS name
Activation code. of the Cisco uCM
You can find more details about setting up Cisco uCM provi-
sioning in the
Back
Infrastructure
External Manager
Register
* the dHCP server can be set up to provide the external Manager
address automatically (dHCP option 150). Any input in the input field
overrides the setting provided by dHCP.
Confirguration Configuration
Register to complete the procedure.
(External Manager).*
Administering tC endpoints on CuCM
Configure Your TelePresence Unit
Cisco UCM
Delete old Certifcate Trust List (CTL) file
Cancel
Register
13
Appendices
Configure Your TelePresence Unit
Select infrastructure:
Cisco VCS
WebEx Telepresence
Cisco UCM
Cisco VCS (for EX Series and MX Series only)
Contact your VCS provider to get the iP address or dNS name
of the Cisco VCS (External
required, the Username/Password
system with the provisioning server.
guide.
Have a look at the Cisco VCS provisioning for eX Series and
MX Series appendix for more information on VCS provisioning.
Configure Your TelePresence Unit
Back
Infrastructure
Username
Password
Domain
External Manager
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.
Getting Started Guide
Contacts
Cancel
Next
Manager), the SiP Domain, and, if
for authenticating the video
Cisco VCS
Cancel
Register