Navigating The Menu; Changing Settings - Cisco Codec C Series Getting Started Manual

Cisco TelePresence Video Systems
Contents
How to use the remote control and
on-screen menu
When you pick up the remote control and touch the rubber line
sensors along its sides, the system wakes up.
Point the remote control towards the system or camera and
press the Home key ( ) to open the top level menu.

Navigating the menu

using the remote control to navigate the menu:
• use the arrows down/up to select a menu item.
• use the arrow right to expand the selection.
•
use the arrow left to go back one step.

Changing settings

using the remote control to change a value:
• Select a value from a drop down list and press the
OK ( ) key to save, or press the left arrow key
without saving.
• enter a value/text in a value/text input field. Navigate to
and press OK ( ) to save the change, or navigate to
and press OK ( ) to leave without saving.
You can find more information about the on-screen menu in the
on-screen menu system appendix.
D14639.09 Video Systems Getting Started Guide TC6.1, April 2013.
Introduction User interfaces
Call
Meetings
Presentation
Camera control
Settings
to leave
Save
Cancel
Configuration
HOME
SETTINGS
Layout
Main source: Camera
Call settings
Languages
Date and time
Sounds and alerts
Wallpaper: Custom
System information
Administrator settings
Restart
ADMINISTRATOR SETTINGS
Programmable softbuttons
Connect to WebEx TelePresence
Set menu password
Pairing
Advanced configuration
32
Appendicies Appendices
Arrow up/down
Press the up and
down arrow keys
to navigate in the
menu.
Arrow left
Press the
left arrow
key to go one
step back in
the menu or to
move to the left
in a text field.
Press the OK/Select
confirm your choice or selection.
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.
Getting Started Guide
Contacts
Arrow right
Press the
right arrow key
to expand the
selected menu
item or to move
to the right in a
text field.
oK/Select
key ( ) to