Configuration Tasks; Getting Started - Cisco Codec C Series Getting Started Manual

Cisco TelePresence Video Systems
Contents

Configuration tasks

the initial configuration tasks are described on the following
pages. Click the read more... hyperlink for the method you
want to use to find the task description.

Getting started

You can see how to wake up the system and start using one
of the user interfaces here:
Touch controller
Remote control
and on screen menu
Web interface
D14639.09 Video Systems Getting Started Guide TC6.1, April 2013.
Introduction User interfaces
Click the
to this task overview.
Provisioning set-up
(when using a provisioning system)
Your system may be configured by an external provision-
ing system. this way a number of settings are provisioned
automatically, and you (most likely) do not have to set the iP,
H.323, SiP and time and date settings.
read more...
Choose one of the following methods to set-up the provi-
sioning parameters:
read more...
Touch controller
read more...
Remote control
and on screen menu
Web interface
Confirguration Configuration
Back... button in the task description to go back
read more...
read more...
read more...
9
Getting Started Guide
Appendices
Setting the IP parameters
(when not set by a provisioning system)
Your video conference system must be connected to an iP
network. Both iP version 4 (iPv4) and iP version 6 (iPv6) are
supported. in both cases, the iP parameters can be assigned
automatically by the network, or you can set everything manually.
Choose one of the following methods to set the iP parameters:
Touch controller
Remote control
and on screen menu
Web interface
Copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.
Contacts
read more...
read more...
read more...