Connecting The Ac Power Cord For The Fixed Ac Power Supply (Method 1) - H3C S5130S-10P-EI Manual

Switch model
S5130S-52P-PWR-EI
S5130S-28S-HPWR-EI
S5130S-52S-PWR-EI
S5130S-28MP-HPWR-EI
S5130S-10MS-UPWR-EI
S5130S-28F-EI
S5130S-52F-EI
S5130S-16S-PWR-EI
S5130S-16S-UPWR-EI-Q
S5130S-28TP-EI
S5130S-52TP-EI
S5130S-28PS-EI
Other S5130S-EI switches
The S5130S-28F-EI and S5130S-52F-EI switches use removable power supplies. The CA-70A12,
PSR75-12A, PSR150-A1, and PSR150-D1 power supplies are available for the switch. The
CA-70A12 and PSR150-A1 power supplies use AC power. The PSR75-12A power supply uses AC
or 240V high-voltage DC power. The PSR150-D1 power supply uses –48 VDC power or RPS power.
Connecting the AC power cord for the fixed AC power supply
(method 1)
1. Connect the plug of the AC power cord to the AC-input power receptacle on the switch. See
Figure2-21.
2. Use a cable tie to secure the power cord to the handle near the AC power receptacle. See
Figure2-22.
3. Connect the other end of the power cord to an AC power source.
Available power source
H3C RPS1600-A
AC power source
H3C RPS1600-A
AC power source
240V high-voltage DC power
source
–48 VDC power source in the
equipment room
H3C RPS800-A or
RPS1600-A
AC power source
AC power source
–48 VDC power source in the
equipment room
AC power source
2-22
Connection procedure reference
AC power supply (method 1)
Connecting the DC power cord for the fixed
DC power supply (method 1)
Connecting the AC power cord for the fixed
AC power supply (method 2)
Connecting the DC power cord for the fixed
DC power supply (method 1)
Connecting the power cord for a
CA-70A12/PSR75-12A/PSR150-A1 power
supply
Connecting the power cord for a
CA-70A12/PSR75-12A/PSR150-A1 power
supply
Connecting the power cord for a
PSR150-D1 power supply
Connecting the power cord for a
PSR150-D1 power supply
Connecting the AC power cord for the fixed
AC power supply (method 2)
Connecting the AC power cord for the fixed
AC power supply (method 1)
Connecting the DC power cord for the fixed
DC power supply (method 2)
Connecting the AC power cord for the fixed
AC power supply (method 1)