Codan SRx Getting Started Manual page 19

Connecting a mobile NGT SRx station
NGT SRx Transceiver Getting Started Guide
To connect a mobile NGT SRx station:
1
Connect the lead from the handset and speaker connector
to the 10-way plug on the cable lead from the RF unit,
then secure the locking ring tightly into position.
1
Connect the plug of the handset cable to the
the handset and speaker connector, then secure the
locking ring tightly into position.
1
Connect the plug at the end of the speaker cable to the
socket on the handset and speaker connector, then
secure the cable by pushing it into the slot on the side of
the connector (see
1
Connect the plug at the end of the
the end of the
the locking ring tightly into position.
1
Connect the plug at the opposite end of the
socket located at the base of the antenna, then secure the
locking ring tightly into position.
Connecting the control cable to an automatic tuning
antenna
To connect the control cable to an antenna:
1
Connect the socket at the end of the
at the base of the antenna, then secure the locking ring
tightly into position.
1
Fit the plug at the opposite end of the
socket at the end of the
Figure 1 on page
cable lead from the RF unit, then secure
lead from the RF unit.
Installation
socket on
5).
cable to the socket at
cable to the
cable into the plug
cable into the
9