Codan SRx Getting Started Manual page 17

Mounting a mobile NGT SRx station
NGT SRx Transceiver Getting Started Guide
Most components of a mobile NGT SRx station are provided
with their own mounting cradles. For general guidance on
suitable locations for equipment and installing these stations
see the reference material on the enclosed CD.
Mounting the handset cradle
To mount the handset cradle:
1
Mount the handset according to the fitting instructions
(Codan part number 15-00129-001) provided with the
handset cradle.
Mounting the speaker
To mount the speaker:
1
Secure the mounting cradle to the surface with at least
two screws.
Ensure there is sufficient space at the rear for the cable.
1
Attach the speaker to the cradle with the two screws and
rubber washers.
Mounting the handset and speaker connector
To mount the handset and speaker connector:
1
Use cable ties or screws to secure the handset and
speaker connector in a suitable location.
Installation
7