Remocon Net Mini Operating Statuses - elco REMOCON NET MINI Installation And Operating Instructions Manual

REMOCON NET MINI operating statuses

The LEDs on the side of REMOCON NET
MINI allow you to have instant feedback
on the operating status of the product.
LED code
WEB LED (internet connection)
Off
Stable Green
Flashing Green (slowly)
Flashing Green (fast)
Stable Red
BUS LED (connection with products which have the BridgeNet BUS protocol)
Off
Stable Green
Stable Red
All LEDs
OFF
Sequential flashing red
Flashing Green (every 5 sec.)
Flashing green (alternating)
REMOCON NET MINI not supplied with power or off
REMOCON NET MINI correctly configured and connected to the Internet
REMOCON NET MINI awaiting configuration
REMOCON NET MINI connecting to the cloud
Connection to the service absent or REMOCON NET MINI not configured
REMOCON NET MINI off
BridgeNet Bus connection working
Bus BridgeNet error or Bus not connected
REMOCON NET MINI off
Start-up of REMOCON NET MINI
REMOCON NET MINI
(is activated 2 minutes after configuration and is deactivated in the event of an error, if the
button is pressed or if parameters are changed)
Software update in progress
46
en