First Start-Up And Internet Connection; Wi-Fi Configuration - elco REMOCON NET MINI Installation And Operating Instructions Manual

First start-up and Internet connection

Wi-Fi configuration

REMOCON NET functions are available
both on the App (Android and iOS) or
via the dedicated portal:
www.remocon-net.remotethermo.com
Account Registration
1. Download the REMOCON NET App
from the Google Play Store or from the
iTunes Store and click on «Create Ac-
count»
Initial start-up
After having installed the product, switch
on the heating system. REMOCON NET
MINI will switch on as it is supplied by the
BUS BridgeNet.
1. For several minutes REMOCON NET
MINI performs its start-up procedure,
during which all the LEDs flash in
sequence in red.
2. After a few seconds, the BUS LED
goes green and the WEB LED remains
constant red.
IMPORTANT:
It is possible to use Remocon NET
on multiple devices simultaneously.
Use the "Guest" function in the App
to invite other registered user
accounts to have full control of your
appliance.
2. Register the account by entering the
requested information. An email with
a confirmation link will be sent
automatically
44
IMPORTANT:
To register more than one
REMOCON NET MINI device to a
single user account use the "Add
appliance" function in the App.
3. Open the email and click on the
confirmation link to activate the account
Wi-Fi configuration
The device is now waiting to be config-
ured, and REMOCON PLUS displays the
icon.
Before starting the REMOCON NET
MINI Wi-Fi configuration procedure,
download the REMOCON NET app from
the Stores and check that the ADSL
router is working correctly.
WARNING!
The product only connects to 2.4 GHz Wi
-Fi networks. 5 GHz networks are not
supported. If both are present (i.e. dual-
band network), make sure to select the
2.4 GHz on the router.
en