Gigaset GX4 Manual page 81

WLAN
Use your smartphone to establish a connection to a WLAN, and use the connection to send data
and to surf the Internet.
A connection is established automatically if your smartphone is within range of a registered
WLAN and the WLAN function is enabled.
Enabling/disabling the WLAN function
From the Status bar, swipe down using two fingers . . . The quick settings are displayed
the WLAN icon
or
Settings
If WLAN is enabled, the icon
Status bar. The icon shows the signal strength on four levels.
To prolong the battery life, disable the WLAN function when you are not using it.
WLAN is disabled in Flight mode.
Establishing a connection to a WLAN
Settings
Networks protected by a password have a lock next to the
icon are public hot spots.
Tap the required WLAN
is successful, Connected is displayed under the network name
WLANs registered for your smartphone are shown at the end of the list under Saved networks,
even if they are currently out of range and no connection is established.
Showing saved WLANs:
Adding more WLANs
WLANs which do not send their name (the SSID) or are not within range are not displayed in the
WLAN list. They can still be saved with name and password. The connection is established if the
WLAN is within range.
Settings
network name (SSID) and security details
networks list
Removing a WLAN
If the requirement is for your smartphone to not connect automatically to a saved WLAN, the
WLAN can be removed from the list of saved networks.
Settings
removed Forget
Wi-Fi Use the switch to enable/disable Use WLAN
and the name of the connected WLAN are displayed in the
Wi-Fi . . . All WLAN within range are displayed.
Enter the network password
Saved networks
Wi-Fi Scroll down if required
Wi-Fi Saved networks
icon. Networks without a lock
Connect . . . If the connection
Add network
Save . . . The network is added to the Saved
Tap on the saved network to be
Network connections
Tap
Enter the
81