Siemens SIRIUS Soft Starter 3RW5 Getting Started page 8

Preface
Software Requirements
● You can execute the example project on any PC or programming device on which the
following software is installed:
– Windows operating system
– Internet Explorer
– Message Queuing service
– SQL server
You can find further relevant details in the following manuals:
– SIMATIC Process Control System PCS 7 PC Configuration and Authorization (V9.0
– SIMATIC Process Control System PCS 7 Released Modules (V9.0 SP2) on the
● You create the SIMATIC PCS 7 project with SIMATIC Manager.
To do so, follow the instructions in the Process Control System PCS 7; Getting Started
documentation.
Hardware used inside this sample project
This SIMATIC PCS 7 sample project was created with the following hardware for the
automation station (AS):
Table 2- 1
Order number
6ES7 410-5HX08-0AB0
6ES7 407-0KA02-0AA0
8
Note
The versions required depend on the version of SIMATIC PCS 7 installed.
SP1) on the Internet (https://support.industry.siemens.com/cs/document/109754983).
Internet (https://support.industry.siemens.com/cs/document/109767525).
Hardware - Automation station 1: Configuration direct on the master system
Description
SIMATIC S7-400, CPU 410-5H with 1*DP and 2*PN interfaces
SIMATIC S7-400, power supply PS 407 10A, AC 120/230V/10A
standard PS
SIRIUS Soft Starter 3RW5 PCS 7 Library
Getting Started, 02/2020, A5E48411356002A/RS-AA/001