Operator Station - Siemens SIRIUS Soft Starter 3RW5 Getting Started

Getting Started

5.5 Operator Station

5.5 Operator Station
Operator Station
Block icons and faceplates are inserted in the project while compiling the Operator Station
(OS).
You can find details on how to work with the Operator Station in the "SIMATIC Process
Control System PCS 7 Operator Station
(https://support.industry.siemens.com/cs/document/109754982)" manual.
Once the OS compilation is done, there will be one block icon created for each template:
● MotL block icon for 3RW52 device
● 3RW5Ctrl block icon for 3RW55 device
A block icon for the 3RW5Oprn block can be enabled manually before OS compilation, as
shown below.
Activate 3RW5Oprn Block icon for 3RW55 device
If you need 3RW5Oprn block icon, you can activate it using the following steps:
1. Open CFC-Editor.
2. Open any one template example: 3RW55_Soft_Starter
3. Select the 3RW5Oprn block.
22
SIRIUS Soft Starter 3RW5 PCS 7 Library
Getting Started, 02/2020, A5E48411356002A/RS-AA/001