Siemens SIRIUS Soft Starter 3RW5 Getting Started page 19

3. Drag the desired template object by pressing the left mouse button and drop the object in
the Chart view, as a reference, this getting started document shows both the templates.
The 3RW52_Soft_Starter and 3RW55_Soft_Starter template is now instantiated.
4. The input address of the Soft Starter 3RW52 / 3RW55 device at HW Config can be
assigned to the interconnectable chart I/O "PZDIn03", the interconnection type will be
DWORD and it should be connected with syntax "ID" as shown in the above screenshot.
(Input address of 3RW52 / 3RW55 Softstarter device) without opening the template.
Note
Manual interconnections
In the CFC, connect "
There are two ways:
• Via the already created symbolic name
• Via direct input of the calculated address
SIRIUS Soft Starter 3RW5 PCS 7 Library
Getting Started, 02/2020, A5E48411356002A/RS-AA/001
(Input address of 3RW52 / 3RW55 Soft Starter device)".
PZDIn03
Getting Started
5.4 CFC
19