Preface - Siemens SIRIUS Soft Starter 3RW5 Getting Started

Preface

Brief description
The Getting Started for the Soft Starter 3RW5 PCS 7 Library uses a simple sample project to
show you the basic procedures:
● Basic configuration steps
● Handling and monitoring different signal blocks
This Getting Started document is intended to be an introduction for using Soft Starter 3RW5
PCS 7 Library.
Requirements
Basic knowledge of creating a SIMATIC PCS 7 project is necessary. You will find information
about this in the Process Control System PCS 7; Getting Started (V9.0 or higher with APL)
documentation on the Internet
(https://support.industry.siemens.com/cs/document/109756196).
Conventions
This documentation contains designations of the software interface elements. If you have
installed a multi-language package for the operating system, some of the designations will
be displayed in the base language of the operating system after a language switch and will,
therefore, differ from the designations used in this documentation.
Soft Starter 3RW5 PCS 7 Library - Information, versions and documentation
Please find an overview of all versions, manuals, readmes, readme_oss, sample project and
additional information on the internet
(https://support.industry.siemens.com/cs/document/109770336).
SIRIUS Soft Starter 3RW5 PCS 7 Library
Getting Started, 02/2020, A5E48411356002A/RS-AA/001
2
7