Advertisement
Thread the other end of rope C1 through the bottom hole on the A10 of the TOP
part of the set.
Thread the rope C1 into the Vertical Hole of one C3 and out through the
Horizontal hole as TIGHT as possible to create tension. Then and secure C1 and
this C3 ONLY with C4 at this moment. See Diagram C below.
IMPORTANT: The climbing rope needs to be as TIGHT as possible to create
tension.
Diagram C
Repeat this step for another rope C1.
Important: Only the C3 has rope C1 thread through
both Horizontal and Vertical Hole need to be secured
with C4 at this STEP 8.
Now the climbing net should look this diagram as
shown on the right.
NOTE: ONLY 1 child on Climbing Net or Climbing Ladder at a time.
100 lbs weight limit per user/child.
CONTACT XDP FOR PARTS AND SUPPORT AT 1.866.884.0535 or service@xdprecreation.com
A10
C1
DO NOT RETURN TO RETAILER WHERE YOU PURCHASED AT.
C3
C4
25
Advertisement
