Advertisement
STEP 16 – Super Disc
Separation of foam tube R3-1 from R3-N
Insert the foam tube R3-1 into R4-N first, then insert R3-N into R3-1 in R4-N.
Slide the smaller ends of R3-N tubes into the pockets of Super Disc
(R4-N). Connect the four tubes together. Align the holes with the round holes
face down.
Important: The round holes on R3-N MUST face down.
CONTACT XDP FOR PARTS AND SUPPORT AT 1.866.884.0535 or service@xdprecreation.com
TM
swing assembly
R3-1
DO NOT RETURN TO RETAILER WHERE YOU PURCHASED AT.
R3-N
R3-1
R3-N
R4-N
R4-N
TM
swing fabric
R3-1
R3-N
34
Advertisement
