Setting - UCL SWIFT SWIFT KF4 User Manual

6.6.3 Electrodes caution
6.6.3 Electrodes caution
The number of electrodes used is set on this menu. It is recommended that electrodes be
The number of electrodes used is set on this menu. It is recommended that electrodes be 6.6.3 ELECTRODES CAUTION
replaced when the number of arcs reaches 4000.
replaced when the number of arcs reaches 4000.
The number of electrodes used is set on this menu. It is recommended that electrodes be replaced when the
The number of times is maximum number possible in the optimal environment.
number of arcs reaches 38,000.
The number of times is maximum number possible in the optimal environment.
Depending on your work environment, it may be possible to use more than the default number of
Depending on your work environment, it may be possible to use more than the default number of The number of times is the maximum number possible in the optimal environment. Depending on your work
times.
environment, it may be possible to use more electrodes than the default number of times.
times.
6.6.4 Number of electrodes use
6.6.4 NUMBER OF ELECTRODES USE
6.6.4 Number of electrodes use
Indicates the number of electrodes used as counted up to the present time.
Indicates the number of electrodes used as counted up to the present time.
Indicates the number of electrodes used as counted up to the present time.
41
Display the setting mode by pressing

6.7. SETTING

button.
Display the setting mode by pressing and then select "SETTING" menu with the
6.7| SETTING
button.
Display the setting mode by pressing
6.7.1 Language
6.7.1 Language
A screen to select a language is displayed.
6.7.1 LANGUAGE
A screen to select a language is displayed.
A screen to select a language is displayed.
6.7.2 Date
A screen to set the time and date is displayed. 6.7.2 DATE
A screen to set the time and date is displayed.
SWIFT KF4-EN, Rev.C
SWIFT KF4-EN, Rev.C
6.7.3 Power save
Move fiber to manual mode and adjust the camera's focus. and then select "SETTING" menu with the
Move the cursor upward.
Move each motor to manual mode.
Splice popup menu should load.
Move the cursor downward.
Move each motor to manual mode.
Heater popup menu should load.
Initialize the splice function.
Return to the menu screen.
and then select "SETTING" menu with the
Complete a selection.
Follow the next step on the menu screen.
Splice execution.
Return to the initial screen and initialize splice function.
Turn on the heater.
When it is on, the lamp on the left is in the red.
Press once more when it is on, and the heater is turned off.
SWIFT KF4-EN, Rev.C 9 SWIFT KF4-EN, Rev.C
58
Move fiber to manual mode and adjust the camera's focus.
Move the cursor upward.
Move each motor to manual mode.
Splice popup menu should load.
Move the cursor downward.
Move each motor to manual mode.
Heater popup menu should load.
Initialize the splice function.
Return to the menu screen.
button.
Complete a selection.
Follow the next step on the menu screen.
Splice execution.
Return to the initial screen and initialize splice function.
Turn on the heater.
When it is on, the lamp on the left is in the red.
Press once more when it is on, and the heater is turned off.
9
58
42