Table of Contents
Advertisement
nu
MENU
menu has eight submenus. Press
to load the main menu.
The main menu has eight submenus. Press
ubmenus can be selected by using
The eight submenus can be selected by using
The main menu screen displays as follows.
screen displays as follows.
PLICING
SPLICING
Replace: Selects and replaces a certain splice mode within the database
•
Replace: Selects and replaces a certain splice mode within the database
Add: Selects and adds a certain splice mode within the database
•
Add: Selects and adds a certain splice mode within the database
Select: Selects a splice mode to run
Edit: Edits set values of splice mode
•
Select: Selects a splice mode to run
Cancel: Closes the menu window
•
Edit: Edits set values of splice mode
Delete: Deletes splice mode
•
Cancel: Closes the menu window
EATER
•
Delete: Deletes splice mode
Replace: Selects and replaces a certain heater mode within the database
HEATER
Add: Selects and adds a certain heater mode within the database
Select: Selects a heater mode to run
•
Replace: Selects and replaces a certain heater mode within the database
Edit: Edits set values of heater mode
•
Add: Selects and adds a certain heater mode within the database
Cancel: Closes the menu window
•
Select: Selects a heater mode to run
Delete: Deletes heater mode
•
Edit: Edits set values of heater mode
•
Cancel: Closes the menu window
•
Delete: Deletes heater mode
HISTORY (SPLICE RESULTS)
•
DISPLAY HISTORY: Displays splice result and image
•
CLEAR HISTORY: Deletes all data
OPTION
Rev.C
•
DEFAULT: Auto, pause, auto heater
•
MENU LOCK: Menu lock setting
•
PASSWORD: Password sets upon locking
17
Move the cursor upward.
Move each motor to manual mode.
Move the cursor to the right.
Splice popup menu should load.
Move fiber to manual mode and adjust the camera's focus.
Move the cursor downward.
Move the cursor upward.
Move each motor to manual mode.
Move each motor to manual mode.
Heater popup menu should load.
Splice popup menu should load.
3. Product Outline
Initialize the splice function.
Move the cursor downward.
3.1. Function buttons
Return to the menu screen.
Move each motor to manual mode.
Heater popup menu should load.
BUTTON
DESCRIPTION
to load the main menu.
Complete a selection.
Initialize the splice function.
Follow the next step on the menu screen.
Return to the menu screen.
, or
Press and hold about 1 second to turn the power on/off.
by pressing
, or
by pressing the screen. The main menu
Move the cursor to the left.
Splice execution.
Complete a selection.
Move fiber to manual mode and adjust the camera's focus.
Follow the next step on the menu screen.
Stripping popup menu should load.
Move the cursor to the right.
Return to the initial screen and initialize splice function.
Splice execution.
Move fiber to manual mode and adjust the camera's focus.
Move the cursor upward.
Turn on the heater.
Move each motor to manual mode.
When it is on, the lamp on the left is in the red.
Splice popup menu should load.
Return to the initial screen and initialize splice function.
Press once more when it is on, and the heater is turned off.
Move the cursor downward.
Move each motor to manual mode.
Turn on the heater.
Heater popup menu should load.
SWIFT KF4-EN, Rev.C
When it is on, the lamp on the left is in the red.
9
Press once more when it is on, and the heater is turned off.
Initialize the splice function.
Return to the menu screen.
SWIFT KF4-EN, Rev.C
Complete a selection.
Follow the next step on the menu screen.
Splice execution.
Return to the initial screen and initialize splice function.
Turn on the heater.
When it is on, the lamp on the left is in the red.
Press once more when it is on, and the heater is turned off.
SWIFT KF4-EN, Rev.C
9
24
CALIBRATION
•
ARC CALIBRATION: Adjusts arc calibration intensity
•
ARC TEST: Check arc quantity through arc test
•
DIAGNOSTIC TEST: Diagnoses equipment state
•
MOTOR DRIVE: Operates motor manually
•
MOTOR CALIBRATION: Initializes motor speed and location
ELECTRODE
9
•
ELECTRODE STABILIZE: Conducts stabilization of electrodes
•
ELECTRODES CAUTION: Sets the number of uses to inform about electrode replacement
•
ELECTRODES REPLACE: Explains how to replace the electrodes
•
ELECTRODE USED: Displays the electrode-use count
SETTING
•
LANGUAGE: Selects a language
•
DATE: Sets the present time
•
POWER SAVE: Sets sleep mode
•
VOLUME: Adjusts the intensity of the buzzer sound
•
LCD BRIGHTNESS: Adjusts screen brightness
INFORMATION
•
MAINTENANCE INFO: Displays maintenance schedule
•
SENSOR VALUE: Indicates temperature and pressure
•
VERSION: Shows the current version of the product
•
HELP: Consists of:
— NAME OF PARTS
— CLEAN AND INSPECT
— WARNINGS
— A/S CONTACT LIST
18
Advertisement
Table of Contents
