Calibration - UCL SWIFT SWIFT KF4 User Manual

Move fiber to manual mode and adjust the camera's focus.
LIBRATION
Move the cursor upward.
Move each motor to manual mode.
splice mode, press and select the "CALIBRATION" menu with the
Splice popup menu should load.
Move the cursor downward.
he calibration menu is equipped with various functions, such as arc amount calibration,
Move each motor to manual mode.
Heater popup menu should load.
y splice mode, press and select the "CALIBRATION" menu with the
eration test, etc.
6.5|

CALIBRATION

Initialize the splice function.
Return to the menu screen.
he calibration menu is equipped with various functions, such as arc amount calibration,
To display splice mode, press and select the "CALIBRATION" menu with the
eration test, etc.
Complete a selection.
Follow the next step on the menu screen.
menu is equipped with various functions, such as arc amount calibration, motor operation test, etc.
Splice execution.
Return to the initial screen and initialize splice function.
Turn on the heater.
When it is on, the lamp on the left is in the red.
Press once more when it is on, and the heater is turned off.
SWIFT KF4-EN, Rev.C
c calibration
6.5.1 ARC CALIBRATION
The KF4 continuously checks for a change in temperature and air pressure through each sensor. Based on such
ontinuously checks for a change in temperature and air pressure through each sensor.
c calibration
data, arc amount is automatically adjusted. However, a change in arc amount due to abrasion of the electrodes
such data, arc amount is automatically adjusted. A change in arc amount due to
or the fi ber splice, is not automatically adjusted. The central axis of the arc can also be moved toward the left or
of the electrodes or the fiber splice, however, is not automatically adjusted. The central ontinuously checks for a change in temperature and air pressure through each sensor.
right. In this case, arc calibration is required.
e arc can also be moved toward the left or right. In this case, arc calibration is required. such data, arc amount is automatically adjusted. A change in arc amount due to
of the electrodes or the fiber splice, however, is not automatically adjusted. The central
e arc can also be moved toward the left or right. In this case, arc calibration is required.
3. Product Outline
3.1. Function buttons
BUTTON DESCRIPTION
Press and hold about 1 second to turn the power on/off.
Move the cursor to the left.
Move fiber to manual mode and adjust the camera's focus.
xecuting arc calibration, arc voltage is automatically changed to a proper value. This
Stripping popup menu should load.
When executing arc calibration, arc voltage is automatically changed to a proper value. This value is calculated
alculated internally; the arc voltage cannot arbitrarily be changed.
Move the cursor to the right.
internally. The arc voltage cannot arbitrarily be changed.
Move fiber to manual mode and adjust the camera's focus.
xecuting arc calibration, arc voltage is automatically changed to a proper value. This
fiber should be used for arc calibration.
Move the cursor upward.
Move each motor to manual mode.
alculated internally; the arc voltage cannot arbitrarily be changed.
Only SM fi ber should be used for arc calibration.
Splice popup menu should load.
Move the cursor downward.
ep and insert SM fiber into the splicer using clamps or proper fiber holders. fiber should be used for arc calibration.
Move each motor to manual mode.
Heater popup menu should load.
1| Prep and insert SM fi ber into the splicer using clamps or proper fi ber holders.
Initialize the splice function.
N, Rev.C Return to the menu screen.
ess as follows.
2| Press as follows.
Complete a selection.
Follow the next step on the menu screen.
N, Rev.C
Splice execution.
Return to the initial screen and initialize splice function.
Turn on the heater.
When it is on, the lamp on the left is in the red.
Press once more when it is on, and the heater is turned off.
SWIFT KF4-EN, Rev.C
35
When arc calibration completes, the following screen is displayed.
Move fiber to manual mode and adjust the camera's focus.
Move the cursor upward.
Move each motor to manual mode.
Splice popup menu should load.
Move the cursor downward.
Move each motor to manual mode.
Heater popup menu should load.
Initialize the splice function.
Return to the menu screen.
button. The calibration
Complete a selection.
Follow the next step on the menu screen.
Splice execution.
Return to the initial screen and initialize splice function.
Turn on the heater.
When it is on, the lamp on the left is in the red.
Press once more when it is on, and the heater is turned off.
9 SWIFT KF4-EN, Rev.C
48
48
9
Press and hold about 1 second to turn the power on/off.
Move the cursor to the left.
Move fiber to manual mode and adjust the camera's focus.
Stripping popup menu should load.
Move the cursor to the right.
iii. When arc calibration completes, the following screen is displayed.
Move fiber to manual mode and adjust the camera's focus.
3| When arc calibration is completed, the following screen is displayed.
Move the cursor upward.
Move each motor to manual mode.
Splice popup menu should load.
Move the cursor downward.
Move each motor to manual mode.
Heater popup menu should load.
Initialize the splice function.
Return to the menu screen.
Complete a selection.
Follow the next step on the menu screen.
9
Splice execution.
4| Press to stop arc before calibration is completed if necessary.
iv. Press to stop arc before calibration is completed if necessary.
Return to the initial screen and initialize splice function.
Turn on the heater.
When it is on, the lamp on the left is in the red.
Press once more when it is on, and the heater is turned off.
6.5.2 Arc Test
6.5.2 ARC TEST
SWIFT KF4-EN, Rev.C
Swift KF4 measures by ARC TEST menu if arc power is proper. When arc power is too weak or too
Swift KF4 measures by ARC TEST menu if arc power is adequate. When arc power is too weak or too strong it is
6.5.2 Arc Test
strong it is automatically adjusted by executing ARC CALIBRATION menu.
automatically adjusted by executing ARC CALIBRATION menu.
Swift KF4 measures by ARC TEST menu if arc power is proper. When arc power is too weak or too
strong it is automatically adjusted by executing ARC CALIBRATION menu.
3. Product Outline
3.1. Function buttons
BUTTON DESCRIPTION
Press and hold about 1 second to turn the power on/off.
Move the cursor to the left.
Move fiber to manual mode and adjust the camera's focus.
Stripping popup menu should load.
SWIFT KF4-EN, Rev.C
Move the cursor to the right.
!
Move fiber to manual mode and adjust the camera's focus.
l Only SM fiber should be used for arc calibration. CAUTION
Move the cursor upward.
Move each motor to manual mode.
Only SM fi ber should be used for arc calibration.
i. Prep and insert SM fiber into the splicer using clamps or proper fiber holders. Splice popup menu should load.
l Only SM fiber should be used for arc calibration.
Move the cursor downward.
Move each motor to manual mode.
Heater popup menu should load.
ii. Press as follows. 1| Prep and insert SM fi ber into the splicer using clamps or proper fi ber holders.
i. Prep and insert SM fiber into the splicer using clamps or proper fiber holders.
Initialize the splice function.
Return to the menu screen.
ii. Press as follows.
2| Press as follows.
Complete a selection.
Follow the next step on the menu screen.
Splice execution.
Return to the initial screen and initialize splice function.
Turn on the heater.
When it is on, the lamp on the left is in the red.
Press once more when it is on, and the heater is turned off.
SWIFT KF4-EN, Rev.C
iii. When arc test completes, the following screen is displayed.
iii. When arc test completes, the following screen is displayed.
9
49
9
36