Nortel 2033 User Manual page 20

Connect the IP Audio Conference Phone 2033 components
Figure 4: Power Interface Module (PIM)
2. Connect one end of the AC power adapter cord to the power supply
port located on the back of the PIM. Thread the cord through the
channel on the bottom of the PIM and plug the other end into the AC
power source.
3. The middle port of the PIM (see
Ethernet cable. Thread the cord through the channel on the bottom of
the telephone, and plug it into the Power Interface Module port on the
telephone. See
20
Figure
Figure 5 on page 21.
4) has an attached CAT5