Reset The Feature Keys To Their Defaults - Nortel 2033 User Manual

Configure settings on the IP Audio Conference Phone 2033
or

Reset the feature keys to their defaults

Note: In SN08/SE08, changes to feature keys are visible only when
you log out of the IP Audio Conference Phone 2033 and log back in
using an IP Phone 2002 or IP Phone 2004; or when the IP Audio
Conference Phone 2033 is used in a joint session with the
M6350 Softclient. The reason is that the IP Audio Conference
Phone 2033 has no physical feature keys. The options are still
present, but you do not see any changes because they apply only to
physical feature keys.
To reset the feature keys to their defaults:
60
7. Choose one of the following:
— Use the Navigation
and highlight Outbox, and press the
OK soft key.
— Press the
8. Use the Navigation
highlight the DN key to be assigned as
the Outbox access key, and press the
OK soft key.
Note: The check mark indicates which
DN key is selected. Calls from this DN
will be logged and available from the
Outbox.
1. Press the Menu
main Menu.
keys to scroll
3 key.
keys to scroll and
soft key to go to the