Set Feature Options - Nortel 2033 User Manual

Configure settings on the IP Audio Conference Phone 2033

Set feature options

Note: In SN08/SE08, changes to feature keys are visible only when
you log out of the IP Audio Conference Phone 2033 and log back in
using an IP Phone 2002 or IP Phone 2004; or when the IP Audio
Conference Phone 2033 is used in a joint session with the
M6350 Softclient. The reason is that the IP Audio Conference
Phone 2033 has no physical feature keys. The options are still
present, but you do not see any changes because they apply only to
physical feature keys.
You can set the following feature options:
• Auto Hide — Features appear only when they are available, based on
the state of your telephone and administrator settings.
• Default Feature — Sets the default feature key.
• Outbox — Sets the feature key used to access your Outbox.
To enable or disable Auto Hide:
or
54
9. Enter the new label using the steps in
"Using the dialpad to enter text" on
page 93.
1. Press the Menu
main Menu.
2. Choose one of the following:
— Use the Navigation
and highlight Settings, and press
the OK soft key.
— Press the
soft key to go to the
keys to scroll
2 key.