Connect the IP Audio Conference Phone 2033 components
Connect the IP Audio Conference
Phone 2033 components
Before you begin
Steps
1. Connect one end of the CAT5 Ethernet cable to the network interface
located on the back of the Power Interface Module (PIM) (see
Figure 4
on page 20). Plug the other end of the CAT5 Ethernet cable
into your IP network interface.
CAUTION
Damage to equipment
Do not plug the IP Audio Conference
Phone 2033 into a regular telephone jack.
Doing so results in severe damage to the
IP Audio Conference Phone. Consult your
system administrator to ensure that you
plug your set into a 10/100BaseT network
interface.
19