Time Measurements - Agilent Technologies 3000 Series User's And Service Manual

Time Measurements

Pressing the Time menu button produces the following menus.
Table 2-28 Time Measurement Menu 1
Menu
Time 1/3
Freq
Period
Rise Time
Fall Time
Table 2-29 Time Measurement Menu 2
Menu
Time 2/3
+Width
-Width
+Duty
-Duty
Table 2-30 Time Measurement Menu 3
Menu
Time 3/3
Delay1
Delay1
Counter
The results of the automatic measurements are displayed on the bottom of the
screen. When invoking individual measurements, a maximum of three results
can be displayed at the same time. The next new measurement result selected
moves the previous measurements to the left pushing the first measurement
result off screen. The hardware counter result is displayed separately in the
upper right-hand corner of the screen. The Display All function displays all of
the measurements except for the Delay measurements at the same time.
Comments
Press to display menu 2 time measurements
Measure the frequency of a waveform
Measure the period of a waveform
Measure the rise time of a waveform
Measure the fall time of a waveform
Comments
Press to display menu 3 time measurements
Measure the positive pulse width of a waveform
Measure the negative pulse width of a waveform
Measure the positive duty cycle of a waveform
Measure the negative duty cycle of a waveform
Comments
Press to display menu 1 time measurements
→
2 Measure the delay between two waveforms using the rising edges
→
2 Measure the delay between two waveforms using the falling edges
Press to toggle the hardware counter on and off
Automatic Measurement Controls
Time Measurements
2-57