Canon DP-V1830 Operation Manual page 22

OSD Menu
Sub Menu
HDR Range
SMPTE ST 2084 (PQ)
22
Hybrid Log-Gamma
Canon Log (HDR)
Canon Log 2 (HDR)
Canon Log 3 (HDR)
S-Log2 (HDR)
S-Log3 (HDR)
Setting procedures
The explanation uses [SMPTE ST 2084 (PQ)] as an example.
When set at [1000], those areas that exceed 1,000 cd/m
to the dynamic range of the video display. When displaying an image with a PQ of 1,000 cd/m
dynamic range of the image. Also, when displaying an image with a PQ of 4,000 cd/m
2
1,000 cd/m .
When set at [4000], those areas that exceed 4,000 cd/m
to the dynamic range of the video display. When displaying an image with a PQ of 4,000 cd/m
brightness lowers, you can still check all the dynamic range of the image.
The brightness of the video display corresponds to the value set for Luminance.
SMPTE ST 2084 (PQ): Set to [1000]
SMPTE ST 2084
(PQ) range
4,000 cd/㎡
1,000 cd/㎡
Sets the display method when Gamma/EOTF for HDR display is selected.
100 to 10000 (1000) Sets the [SMPTE ST 2084 (PQ)] dynamic range to be displayed, from 0.005
to 10,000 cd/m
1000 increments)
100 to 1000 Sets how far to display the [Hybrid Log-Gamma] dynamic range.
(in increments of 100)
The upper limit value will change to match the settings of [HLG System
Gamma]. (
100 to 800 Sets the [Canon Log] dynamic range to be displayed, from 0 to 800%. (in
100 increments)
100 to 1600 Sets the [Canon Log 2] dynamic range to be displayed, from 0 to 1600%.
(in 100 increments)
100 to 1600 Sets the [Canon Log 3] dynamic range to be displayed, from 0 to 1600%.
(in 100 increments)
100 to 1400 (1000) Sets how far to display the [S-Log] dynamic range. (in 100 increments)
100 to 3900 (1000)
SMPTE ST 2084 (PQ) 4,000 cd/m
(Luminance: [1000.0])
Range of
DP-V1830
Clip (Saturates gradation.)
1,000 cd/㎡
Brightness value
corresponding to
the [Luminance]
setting
Setting Options (Bold: factory default)
2
(nits). (100 to 4000: 100 increments. 4000 to 10000:
27)
2
are clipped, and those that are 1,000 cd/m
2
are clipped, and those that are 4,000 cd/m
2
signal
SMPTE ST 2084 (PQ): Set to [4000]
SMPTE ST 2084
(PQ) range
Gradation is reproduced by assigning
4,000 cd/㎡
1,000 cd/㎡
2
or below are assigned
2
, you can check the entire
2
, you can check the image up to
2
or below are assigned
2
, although the apparent
Range of
DP-V1830
the range to the range of the
DP-V1830 (which lowers
the brightness).
1,000 cd/㎡