Table of Contents
Advertisement
Audio Settings
This menu is used to set audio output.
Sub Menu
CH L (SDI)
CH R (SDI)
CH L (HDMI)
CH R (HDMI)
Volume (speaker)
Volume ( / AUDIO OUT)
CH1 to CH16 (CH1)
Sets the audio to be output from the two channels (L/R) of the headphone
respectively.
CH1 to CH16 (CH2)
CH1 to CH8 (CH1)
CH1 to CH8 (CH2)
0 to 100 (30)
Sets the volume of the speaker or headphone/AUDIO OUT terminal.
(Increments of 1)
• When the headphone is connected to the headphone terminal, output
from the speaker stops.
• The AUDIO OUT terminal can be used at the same time as the speaker.
• The volume of the headphone and AUDIO OUT terminal is the same.
Setting Options (Bold: factory default)
OSD Menu
39
Advertisement
Table of Contents
