Table of Contents
Advertisement
OSD Menu
Picture Function Settings
This menu is used to set video assistance functions, for example.
Sub Menu
56
1
Peaking
Enable
Monochrome
Frequency
Range
Color
1
False Color
Enable
Type
Range - SDR
The outline is displayed in a color, used to check the focus. Customizes peakings which are assigned
to Peaking 1 or Peaking 2.
Peaking 1
Switches the peaking display mode and also sets peaking to Off.
Peaking 2
Off
When [Peaking 1]
Displays video in monochrome.
On, Off
When [Peaking 2]
On, Off
When [Peaking 1]
Sets the central frequency of contour enhancement signals.
Low, Middle, High
When [Peaking 2]
Low, Middle, High
-3 ~ 3 (0)
Sets the width of the range to be colored.
White, Red, Green,
Sets the color to be used.
Blue, Yellow, Cyan,
Magenta
Displays different colors for the video's brightness levels to make it easier to check the exposure and
brightness distribution. Customizes the false color and sets it to false color 1 or false color 2.
False Color 1
Switches between False Color display mode and non-display.
False Color 2
Off
Automatic
Sets the tint color display method.
IRE
[Automatic]: Sets in accordance with the [Gamma/EOTF] settings.
• When [IRE] is selected, [Range - SDR] and [Range - HDR] settings become
invalid.
When [False Color 1]
Sets whether to tint the SDR area.
On, Off
When [False Color 2]
When [On], sets the size of the area to be tinted. (10 to 100: increments of
On, Off
5, 100 to 200: increments of 10)
Monochrome/Brown: 10 to 190 (40)
Brown/Monochrome: 20 to 200 (85)
Setting Options (Bold: factory default)
Advertisement
Table of Contents
