Table of Contents
Advertisement
Operating the Video Display
Operating the video display using an external device [LAN terminal]
The video display supports Television Systems Ltd.'s "TSL UMD Protocol Ver. 5.0". You can operate the video display
using an external device connected to the LAN terminal and display characters and tally lights on the screen. There are
two tally lights, on the left and right. Up to 16 characters can be displayed.
18
1 Connect an external control device to the LAN terminal.
2 Set [SCREEN] and [INDEX] to [0x0000] in the TSL Protocol settings.
3 Select
4 Select [Control] [TSL Ver. 5.00].
• This will allow operation from an external control device, and display characters and tally lights.
5 Select [Position]
• This sets the position where characters and tally lights will be displayed.
Note
• When [Multi View (Dual)] or [Multi View (Quad)] is displayed, set the [INDEX] setting to from [0x0001] to [0x0004].
• The port number for the controlling is fixed at "45000".
• With [In Monitor Display] you can also display user-selected characters on the screen. (
• Unicode characters can be used in displayed text strings. However, some characters may not be displayed correctly.
Tally display (left)
[Network/IMD Settings]
[Top] or [Bottom].
Character display
Tally display (right)
[In Monitor Display].
60)
Advertisement
Table of Contents
