to the Output family. Thees outputs have dedicated DIP switches that identify the OUTPUT ID.
Maximum number of devices possible:
2. Connect Zone Inputs
The following diagrams illustrate the various possible zone connections to the main unit or to the 8 wired zone expander.
Notes:
For a zone with a tamper switch, you can use a double end-of-line resistor to save additional main panel connections.
It is recommended that you use an end-of-line resistor at the far end of each hardwired zone (16 x 2.2K resistors are supplied).
In the 2GIG Vario system, you have the ability to separately define the end-of-line resistance of the zones on the main unit and of the wired the wired zones for
each eight-unit expander block (Quick Keys ② ① ③ ). Selection is done by the software with the following available options: