33. Pinch the adjusting knob portion of the optical compensator holder with the tweezers, then adjust the
angle of the optical compensator (3 portions).
t
. Set the lens to TELE end with open aperture.
. Perform the adjustment twice for each in the order of G → R → B of the optical compensator, and
adjust to the position where the entire screen becomes darkest.
3
B
2
R
34. Turn off the power of this unit.
35. Remove the tape of the limit switch.
36. Remove the projector tool FPC kit, fine-wire coaxial cables, fine-wire coaxial relay board, and shade
plate assembly (Reta Ajst). (Refer to steps 20 to 27.)
1-36 (E)
Adjusting knob of the optical
compensator holder
1
G
VPL-VW760ES