Sony VPL-VW760ES Service Manual page 39

Required equipment/tools
. Projector tool FPC kit (3 kits) (part number: 9-913-300-49)
. Retarder adjustment kit (RETA AJST KIT (SVC)) (Parts No.: A-2203-385-A)
The shade plate assembly (Reta Ajst), fine-wire coaxial relay board (FX board) and additional fine-wire
coaxial cable are contained in the kit described above.
. Tweezers (part number: J-7121-570-X)
Manufacturer: Misumi
Product name: Tweezers (Tapering curvature type)
Model number: TZ-4
. Plastic disposable syringe (syringe) (part number: J-7121-580-X)
Manufacturer: Osaka Chemical
Product name: Plastic disposable syringe Mini-Bulk (not packaged) luer tip type
Model number: A8410-LT
Capacity: 10 ml
Quantity: 100 pcs/bag
. Beard nozzle (part number: J-7121-590-X)
Manufacturer: ICOM
Product name: Fine tip nozzle TYPE (B): for fine portion
Model number: KK-17B
Quantity: 52 pcs/bag
. RTV rubber (part number: 7-322-065-48)
Manufacturer: Shin-Etsu Chemical
Product name: Shin-Etsu silicone
Model number: KE-3490
Capacity: 200 g
. VG (programmable video signal generator): ASTRODESIGN VG-876 or equivalent
. Connection cable: HDMI cable
. Cutter
. Absolute alcohol (ethanol: 99.5% or more or propanol: 99.5% or more)
. Cotton swab
Procedure
1. Perform the light dimming adjustment. (Refer to "Light dimming adjustment" in this section.)
2. Remove the lens cover assembly. (Refer to Section 1-5-1.)
3. Remove the top cover assembly. (Refer to Section 1-5-2.)
4. Remove the front panel (R). (Refer to Section 1-5-4.)
5. Remove the front panel (L). (Refer to Section 1-5-5.)
6. Remove the DC fan (for power supply exhaust). (Refer to Section 1-5-6.)
7. Remove the DC fan (for wheel exhaust). (Refer to Section 1-5-7.)
8. Remove the light source block assembly. (Refer to Section 1-5-8.)
9. Remove the DC fan (for panel). (Refer to Section 1-5-9.)
10. Remove the DC fan (for wheel intake). (Refer to Section 1-5-10.)
11. Remove the switching regulator. (Refer to Section 1-5-13.)
12. Remove the G board block. (Refer to Section 1-5-14.)
13. Remove the optical block assembly. (Refer to Section 1-5-15.)
14. Remove the CA board and CB board. (Refer to Section 1-5-16.)
15. Remove the prism core assembly. (Refer to Section 1-5-20.)
VPL-VW760ES
1-31 (E)