QTech QSW-6900-32H Series Installation Manual page 28

Installation Manual
Error! Use the Home tab to apply Заголовок 1 to the text that you want to appear here.. Error! Use the Home tab to apply
Заголовок 1 to the text that you want to appear here. 28
Enter the name of the new connection and click OK. A window appears as shown in Figure 4-3.
In the column of Connect Using field, select the serial port you want to use.
Figure 4-3
After the serial port is selected, please click OK. The Serial Port Parameter Setting window is
displayed, as shown in Figure 4-4. Set the baud rate as 9600, data bit as 8, parity check as none,
stop bit as 1, and flow control as none.
Figure 4-4
www.qtech.ru