Compatibility With The Predecessor Module - Siemens SIMATIC ET 200S Manual

Properties

1.2 Compatibility with the predecessor module

1.2 Compatibility with the predecessor module
Compatible with 2AI 2WIRE HS analog electronic module (6ES7132-4GB51-0AB0)
If you configure the 2AI 2WIRE HS (6ES7132-4GB52-0AB0) as the predecessor module
(6ES7132-4GB51-0AB0), it behaves compatibly.
The following technical specifications of the 2AI 2WIRE HS (6ES7132-4GB52-0AB0) are set
according to the predecessor module (6ES7132-4GB51-0AB0):
Technical specifications for 2AI 2WIRE HS
6ES7132-4GB52-0AB0
Between channels and load voltage
L+
Cycle time in ms (per module)
Resolution (including overrange)
Smoothing of the measured values
Current consumption and power loss
Note the change in the current consumption and power loss of the 2AI 2WIRE HS
(6ES7132-4GB52-0AB0) compared to the predecessor module (6ES7132-4GB51-0AB0).
See also
2AI I 2WIRE HS analog electronic module (6ES7134-4GB52-0AB0) (Page 7)
12
Galvanic isolation
Yes
Analog value generation
0.25 ms
4 to 20 mA/15 bit
0 to 20 mA/15 bit
Sensor selection data
Time constant
1 x cycle time
4 x cycle time
16 x cycle time
32 x cycle time
2AI I 2WIRE HS analog electronic module (6ES7134-4GB52-0AB0)
configured as
6ES7132-4GB51-0AB0
Yes
1 ms
4 to 20 mA/13 bit
0 to 20 mA/13 bit
Time constant
1 x cycle time
64 x cycle time
128 x cycle time
512 x cycle time
Manual, 01/2008, A5E01001734-02