Memoq SR-600 User Manual

SR-600 User's Manual
Wristwatch Type Voice Recorder
* We are not responsible for the loss of recordings caused by wrong usage, A/S, other reasons.
* We are not responsible for the damage or third party's claims caused by the usage of this product.

Cautions in use

* Disassembly, remodeling, impact, the usage in place of low temperature, high temperature, high humidity
can be the cause of failure.
* Please save the important recordings into PC frequently.
* This product supports water resistance.
* For normal use of water resistance, read the following carefully.
* Failure to comply with the following may result in damage to the product or no performance guarantees.
* Avoid exposure to contaminated water, chemicals etc.
* Do not use products when diving or water sports.

Water resistance

* Don't put excessive water pressure on the product. (For example, water from a faucet)
* If the product is damaged or damaged by an external impact, the water resistance may deteriorate.
* Don't take it apart yourself. Damage to the water resistance may occur.
* If the product is submerged or the microphone is wet, smooth operation may be difficult.
Dry the product completely before using it.
⑤
①
②
Name of each part
③
&
components
<Product components>
① ②
Recording sign
⑤ ⑥
Microphone
Battery Indicator
Installing and
separating
the watch strap
Watch strap
※Install the main body to watch strap
Push the front of the main body from bottom
to top and install it to the watch strap.
Caution : Install the directions of body USB terminal and watch strap to be exactly the same.
⑥
⑦
⑧
④
<Watch strap>
③ ④
Watch screen Day and date display USB terminal
⑦ ⑧ ⑨
Recording button Watch strap Microphone hole
Watch strap
Main
body
Main
body
※Separate the main body from watch strap.
Push the front of the main body outwards
the watch strap to separate the product from
the watch strap to connect it to PC.
R-R-ESO-SR-180

Charging

⑨
Connecting
PC USB
Setting the
recording
function

Instructions for use

* The product has a built-in battery and can be used after charging.
* Charging starts when the product's USB terminal is connected to the PC's USB port or a charging adapter (optional).
Caution : Be sure to use a certified charging adapter (rated output DC5V/500mA or higher).
Damage to the product due to a defective charging adapter may result in paid repair.
Caution :Charging will not start if the USB terminal is connected in the wrong direction.
* During recording, you can check the remaining battery status according to the battery icon displayed on the watch screen.
* When charging is complete, the screen turns off, and you can turn it on again by pressing the recording button.
Battery remains indication.
under 20% 20~50% 50~80%
* When this device is connected into the USB port of PC, it is recognized as a "Removable disk (MEMOQ)",
and copy, movement, deletion, playback of file is possible.
* For playback, please use the music playback software of PC.
Caution : Do not connect to the PC USB port or charing adapter(option) when the USB terminal is wet.
Caution : When you separate product from PC, please be sure to perform "hardware safety removal".
When you remove product from PC by force, fatal error on product can occur.

How to use time setting program

1. After connecting the product's USB terminal to the PC's USB port, run the "TIME SETUP" program stored in the product.
VOS ON/OFF
Mode (Record Quality) VOS On/Off VOS Level MIC Sense
PCM VOS Off +2
XHQ +1
Recording sound quality
VOS On
HQ 0
SP -1
LP -2
Schedule Recording Themes
Off A
Scheduled Recording
B
On
C
2022-01-01 13:00:00
DATE_TIME.CFG
Creation button
2. After checking the settings according to the usage environment, click the "START" button.
3. If the "DATE_TIME.CFG" file is normally created in the product, disconnect the product from
the USB port to complete the setting.
Caution : The date and time set on the PC are displayed.
If the date and time are displayed differently, please check the PC settings.
Caution : If the product is not separated immediately after clicking the START button,
a time error will occur as much as the delayed time.
Caution : If the product is not separated from the PC after clicking the START button, the setting will not be completed.
※ first method
Flip the watch strap
backwards to connect the USB.
※ second method
Separate the watch strap
and connect the USB.
80~100%
VOS Level
High
Middle
Microphone sensitivity
Low
Watch screen theme
Current date and time