Page 2
Thank you for purchasing the products of Flysky! To find out more about our products, visit our website at www.flysky-cn.com. If you encounter any problems during using, please refer to the manual first. If the problem is still not resolved, contact your local dealer directly or contact the customer service staff via Flysky official website.
Transmitter Overview [1] CH1 Steering Wheel [2] CH2 Throttle Trigger [3] CH3 Three-position Switch [4] Neck Strap Hook [5] Handle (4 removable batteries can be contained) [6] Logo Sticker [7] LED [8] BIND Button [9] ST- Button(Steering trim or D/R decrease) [10] TH- Button(Throttle trim or D/R decrease) [11] Power Switch [12] REV Button(Sterring/Throttle reverse)
Page 4
Basic Operations Power on Follow the steps below to turn on the transmitter: 1. Check to make sure that the batteries are fully charged and installed correctly. 2. Switch the Power Switch to ON position, at the time, the transmitter LED is solid on in green.
Page 5
Note: When D/R adjustments take affect, the buzzer will promt with a short beep.When it is at the end, the buzzer will prompt with long beep. Failsafe When the transmitter is turned on, keep the channel output at the desired value, then press and hold the BIND button for 3S, after the buzzer prompts with long beep on tone 1, the failsafe is set successful.
LED which is in flash-three-one-off state. Note: When the transmitter has received the information returned by the receiver, it will exit reminder mode. Specifications Product Name FMS-G3 Compatible Receiver FMS-R3A Model Type 1:18 , 1:24 simulation cars or rock cars PWM Channels 2.4GHz ISM...
-- Consult the dealer or an experienced radio/TV technician for help. EU DoC Declaration FMS-G3 Hereby, [Flysky Technology co., ltd] declares that the Radio Equipment [ ] is in compliance with RED 2014/53/EU. The full text of the EU DoC is available at the following internet address: www.flysky-cn.com.